Resound TV Streamer 2 Manual: A Comprehensive Guide

This manual details setup, operation, and troubleshooting for the ReSound Unite TV Streamer 2, ensuring optimal hearing aid connectivity and a superior audio experience.

Welcome to enhanced television listening! The ReSound TV Streamer 2 is a revolutionary device designed to wirelessly transmit audio directly from your television to your ReSound hearing aids. This eliminates the need for cumbersome headphones or adjusting your TV volume for others. It’s a key component of the ReSound Unite system, offering a personalized and immersive audio experience.

This streamer isn’t just about convenience; it’s about clarity. Enjoy crisp, clear dialogue and sound effects, tailored specifically to your hearing needs. The TV Streamer 2 is compatible with a range of ReSound hearing aid models (see compatibility section for details) and works seamlessly with the ReSound Unite Remote Control for effortless adjustments. This introduction sets the stage for a comprehensive guide, covering everything from initial setup to advanced features, ensuring you maximize the benefits of your new audio solution.

What is the Resound Unite TV Streamer 2?

The ReSound Unite TV Streamer 2 is a wireless transmitter that bridges the gap between your television and ReSound hearing aids. Unlike traditional methods, it doesn’t rely on Bluetooth, offering a more reliable and higher-quality audio connection. It receives audio signals from your TV – whether through optical, RCA, or headphone jack – and transmits them directly to your hearing aids within a range of up to 30 feet.

Essentially, it acts as a personal sound system, delivering TV audio directly to your ears without disturbing others. This is particularly beneficial for those with hearing loss, allowing them to enjoy their favorite programs at a comfortable volume. It’s a dedicated device, designed specifically for ReSound hearing aids and accessories, ensuring seamless integration and optimal performance within the ReSound ecosystem. It’s more than just an adapter; it’s a gateway to clearer, more enjoyable television viewing.

Key Features and Benefits

The ReSound Unite TV Streamer 2 boasts several key features enhancing your TV listening experience. Direct audio streaming eliminates background noise and allows personalized volume control directly from your hearing aids. It supports various TV connection types – optical, RCA, and headphone jack – offering broad compatibility. The device is designed for reliable performance, avoiding the common dropouts associated with standard Bluetooth connections.

Benefits include improved speech clarity, reduced listening fatigue, and the ability to enjoy TV at a comfortable volume without disturbing others. It’s user-friendly, with simple setup and operation. Furthermore, it integrates seamlessly with other ReSound Unite accessories, like the Remote Control, for comprehensive audio management. Enjoy a truly immersive and personalized TV experience tailored to your hearing needs, enhancing entertainment and connection.

Setting Up Your Resound TV Streamer 2

Proper setup ensures optimal performance. This section guides you through unboxing, connecting to your TV, and pairing with your ReSound hearing aids for seamless streaming.

Unboxing and Component Check

Carefully unpack your ReSound TV Streamer 2 and verify all components are present. The box should contain the TV Streamer 2 unit itself, a USB power supply for charging, and this user manual. Inspect each item for any visible damage that may have occurred during shipping.

Confirm the Streamer’s physical condition; it should be free from cracks or dents. Ensure the USB connector is intact and undamaged. If any components are missing or appear damaged, do not attempt to use the device. Contact ReSound customer support immediately for assistance and potential replacement options. Retain the original packaging for potential returns or warranty claims. Proper component verification is crucial for a smooth setup process and optimal functionality.

Connecting to Your TV

Connect the ReSound TV Streamer 2 to your television using either the optical (Toslink) or RCA audio output. Optical connection is preferred for superior sound quality. Locate the corresponding audio output port on your TV – consult your TV’s manual if needed. Ensure your TV’s audio output is set to the correct port.

For RCA connections, match the red and white plugs to the corresponding jacks on both the Streamer and your TV. If using the USB power supply, plug it into a wall outlet and connect it to the Streamer. Power on the Streamer; the indicator light will illuminate. Verify a stable connection by checking the Streamer’s status light – it should indicate a successful link to the TV.

Pairing with Resound Hearing Aids

To pair your ReSound hearing aids with the TV Streamer 2, first ensure your hearing aids are switched on and in pairing mode. This is typically achieved by briefly pressing the multi-button on each hearing aid – consult your hearing aid’s manual for specific instructions.

Next, put the TV Streamer 2 into pairing mode by pressing and holding the pairing button on the device until the indicator light flashes blue. Your hearing aids should automatically detect the Streamer. Confirm the pairing request within your hearing aid app or by acknowledging it on the hearing aids themselves. Once paired, the Streamer’s indicator light will turn solid blue, indicating a successful connection. You are now ready to stream audio directly to your hearing aids!

Using the Resound TV Streamer 2

Enjoy direct audio streaming to your ReSound hearing aids, offering personalized sound control and a clear, immersive listening experience from your television source.

Basic Operation and Controls

The ReSound TV Streamer 2 operates with simplicity in mind, designed for effortless integration into your home entertainment setup. Power on the streamer using the power button located on the device’s rear panel; a small LED indicator will illuminate, confirming activation. The streamer automatically seeks a connection with previously paired hearing aids.

Volume control is primarily managed through your ReSound hearing aids themselves, utilizing their standard volume adjustment methods. However, if paired with a ReSound Unite Remote Control, you gain dedicated volume up and down buttons for convenient adjustments directly from the remote. The streamer’s functionality centers around transmitting audio; it doesn’t feature independent volume controls. Ensure the streamer is within a reasonable range of both your TV and hearing aids for optimal performance. A stable connection is indicated by a solid LED light.

Adjusting Volume and Sound Settings

Volume adjustment for the ReSound TV Streamer 2 is primarily controlled through your ReSound hearing aids, utilizing their existing volume controls – buttons, dials, or smartphone app adjustments. For enhanced control, pairing with the ReSound Unite Remote Control provides dedicated volume up and down buttons, offering convenient adjustments without needing to access your hearing aids directly.

Sound settings, such as equalization or directional focus, are also managed within your hearing aid’s settings, not the streamer itself. The streamer transmits the audio signal as-is; it doesn’t modify the sound profile. Experiment with your hearing aid’s sound programs to find the optimal setting for different TV content. Ensure your hearing aids are properly fitted and programmed by an audiologist for the best possible audio experience with the TV Streamer 2.

Direct Streaming from TV to Hearing Aids

Once paired, the ReSound TV Streamer 2 facilitates direct audio streaming from your television to your ReSound hearing aids, bypassing background noise and delivering a clear, personalized listening experience. Simply turn on your TV and the streamer; audio will automatically transmit to your aids. No need for external speakers or headphones!

The streaming range is typically up to 30 feet (10 meters), allowing for comfortable movement within the room. Ensure the streamer has a clear line of sight to your hearing aids for optimal performance. If experiencing dropouts, reposition the streamer or minimize obstructions. Enjoy a private and immersive TV viewing experience, tailored to your individual hearing needs, with the convenience of direct streaming.

Troubleshooting Common Issues

This section provides solutions for connection problems, sound quality concerns, and battery-related issues, ensuring a smooth and enjoyable ReSound TV Streamer 2 experience.

Connection Problems

Experiencing difficulty connecting your ReSound TV Streamer 2? First, ensure the streamer is adequately charged and within range of your hearing aids – typically within 30 feet, unobstructed. Verify your hearing aids are switched on and in pairing mode; consult your hearing aid manual for specific instructions.

Confirm the TV streamer is properly connected to your television via the appropriate cable (optical, RCA, or headphone jack). If using an optical cable, ensure it’s securely plugged into both the TV and the streamer. Try a different audio output on your TV if possible.

If pairing fails repeatedly, try resetting both the streamer and your hearing aids. Refer to the ReSound Unite app or your hearing aid’s documentation for reset procedures. Interference from other Bluetooth devices can sometimes cause issues; try turning off nearby Bluetooth devices temporarily. Finally, ensure you are using ReSound-approved accessories for optimal compatibility.

Sound Quality Issues

If the sound streamed to your hearing aids is distorted, muffled, or too quiet, several factors could be at play. First, check the volume levels on both your TV and the ReSound TV Streamer 2. Ensure the streamer’s volume isn’t set too low. Also, verify your hearing aids’ volume is appropriately adjusted.

Poor sound quality can also stem from the audio source. Try switching to a different TV channel or playing a different media source to see if the issue persists. If using an optical cable, confirm it’s securely connected and that your TV’s audio output is set to PCM or Dolby Digital.

Experiment with different sound settings on your TV, such as adjusting the equalizer or surround sound settings. Finally, ensure the streamer’s firmware is up-to-date via the ReSound Unite app, as updates often include sound quality improvements.

Battery Life and Charging

The ReSound TV Streamer 2 utilizes a rechargeable battery, providing several hours of streaming enjoyment on a full charge. Battery life varies depending on streaming volume and usage patterns. A fully depleted battery typically takes approximately 2.5 to 3 hours to recharge completely using the provided USB cable and a standard USB power adapter.

To check the battery level, connect the streamer to the ReSound Unite app on your smartphone or tablet. The app displays the current charge status. It’s recommended to fully charge the device before initial use and whenever it hasn’t been used for an extended period.

Avoid exposing the streamer to extreme temperatures or moisture, as this can negatively impact battery performance and lifespan. Only use the supplied charging cable to prevent damage.

Advanced Features and Settings

Explore customization options via the ReSound Unite Remote Control and app, including firmware updates for optimal performance and enhanced functionality.

Using with Resound Unite Remote Control

The Resound Unite Remote Control significantly expands the functionality of your TV Streamer 2, offering convenient control over various settings. Pairing is straightforward; ensure your Remote Control is charged and within range of the Streamer. Once connected, you can adjust the volume directly from the remote, without needing to interact with your TV’s volume controls.

Beyond volume, the Remote Control allows for fine-tuning of sound settings, including switching between programs optimized for different audio sources – news, music, or movies. You can also mute the sound entirely; The remote’s intuitive interface makes navigating these options simple, even for those less familiar with technology. Furthermore, the Remote Control facilitates access to firmware updates, ensuring your TV Streamer 2 always operates with the latest improvements and features. Regularly check for updates through the ReSound app to maintain peak performance.

Firmware Updates and Maintenance

Maintaining your Resound TV Streamer 2 with regular firmware updates is crucial for optimal performance and access to the latest features. Updates are typically delivered through the ReSound Smart 3D app, requiring a stable Bluetooth connection between your hearing aids, the Streamer, and your smartphone.

The app will notify you when an update is available; follow the on-screen instructions carefully during the installation process. Do not interrupt the update, as this could potentially damage the device. Beyond updates, periodic cleaning with a soft, dry cloth is recommended to remove dust and debris. Avoid using harsh chemicals or solvents. Store the Streamer in a cool, dry place when not in use. Regularly checking the charging contacts for cleanliness will also ensure reliable charging. Proper maintenance extends the lifespan of your device.

Compatibility and Accessories

The Resound TV Streamer 2 works seamlessly with select ReSound hearing aid models, and enhances functionality with the Unite Remote Control for convenient adjustments.

Compatible Resound Hearing Aid Models

The Resound TV Streamer 2 boasts broad compatibility, supporting a wide range of ReSound hearing aid technologies. Generally, it functions optimally with ReSound hearing aids featuring 2.4 GHz Bluetooth technology. This includes models from the Alera, Enzo, Preza, and Enya lines, as well as newer generations like the One and Omnia series.

Specifically, compatibility extends to ReSound Smart 3D, ReSound Supreme, and ReSound Aventa models. However, it’s crucial to verify compatibility with your specific hearing aid model and firmware version on the ReSound website or through your audiologist. Older models might require a firmware update to ensure seamless connection. The streamer is designed to work with both behind-the-ear (BTE) and receiver-in-canal (RIC) hearing aid styles, providing versatile usage options.

Available Accessories

Enhance your Resound TV Streamer 2 experience with a range of compatible accessories designed for optimal functionality and convenience. The Resound Unite Remote Control is a key addition, allowing for easy volume adjustment and program selection directly from your hearing aids, without needing to access the TV itself.

For charging, a standard Micro-USB cable is included, but a separate charging cradle is available for convenient placement and consistent power. Replacement earhooks and wax guards for compatible hearing aids are also readily accessible. ReSound offers various connectivity cables (optical, RCA) to ensure compatibility with diverse television setups. Consider a protective travel case to safeguard your streamer during transport. Finally, explore ReSound’s customer support resources for additional accessory recommendations tailored to your specific needs.

Safety and Warranty Information

Always follow safety precautions to prevent damage or injury. Review the warranty details for coverage, limitations, and support options provided by ReSound.

Important Safety Precautions

To ensure safe operation of your ReSound TV Streamer 2, please adhere to the following guidelines. Only connect ReSound devices with accessories supplied by ReSound, such as the Unite Remote Control. Avoid using the streamer in excessively humid environments or exposing it to direct liquids, as this may cause damage.

Do not attempt to disassemble or repair the device yourself; contact ReSound support for assistance. Keep the streamer away from extreme temperatures and direct sunlight for prolonged periods. Regularly check the power adapter and cable for any signs of damage.

This device is not intended for use by children without adult supervision. Ensure proper ventilation around the streamer during operation. Discontinue use if you notice any unusual behavior, such as overheating or strange odors. Following these precautions will help maintain the longevity and safe functionality of your ReSound TV Streamer 2.

Warranty Details and Support

Your ReSound TV Streamer 2 is covered by a standard warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from misuse, accidents, or unauthorized repairs.

For detailed warranty terms and conditions, please refer to the separate warranty document included with your product or visit the official ReSound website. ReSound offers comprehensive customer support through various channels, including online resources, FAQs, and a dedicated customer service team.

You can find contact information and support options on the ReSound website. Should you encounter any issues or have questions, do not hesitate to reach out to ReSound support for prompt assistance and resolution.